Home > News > Content
Three-in-one Bus Machine Cleaning Work
Jul 18, 2017

Three-in-one bus machine features:

1, the cutting unit using a common double-knife shear, cut flat, no burr

2, punching unit using six-mode integral turntable, to ensure that the upper mold and the mold of the absolute alignment, extending the life of the mold. No need to replace the mold, Three in One Busbar Machine the use of more convenient and efficient, the production efficiency was significantly higher than the traditional punching unit.

3, bending unit using a closed whole frame structure, so that in the processing of bending and embossing more evenly, greatly improving the batch production of repeated positioning accuracy and extend the service life.

4, bending unit using horizontal processing, in the processing more secure and convenient. The same time as the above-

5, the machine's three work stations can work at the same time, Three in One Busbar Machine do not affect each other, greatly improving the efficiency

6, the working stroke of each processing unit can be easily adjusted to reduce the processing of auxiliary time, improve production efficiency.

7, hydraulic tank with thick steel plate welding, and made phosphating treatment, so that long-term use of hydraulic oil will not degenerate. The following are the same as the "

Any machine with a long time will produce a lot of dust and product debris, if not timely cleaning, it may lead to the normal operation of the machine, so for the three-in-one bus machine, in addition to doing maintenance work, cleaning work Is also the key.

First, the hot oil cleaning method for the use of course of time, Three in One Busbar Machine soft dry oil or anti-rust paste hardening of the bearings, should be immersed in 100-200 ℃ of hot oil, with pliers to hold the bearings, brush with clean brush on the oil. Soft dry oil or anti-rust paste is heated to 100-200 ℃ on the melting, very simple from the gap in the bearing washed out. Sometimes as long as the bearings in the oil repeatedly shaking. The oil will also flow away from the gap.

In the cleaning of the old three-in-one bus motor or imported motor radial spherical bearings, it should be the ball, bead, inner ring out from the outer ring and then immersed in the hot oil, Three in One Busbar Machine short cylindrical roller bearings clean Should also be the roller, bead, inner ring and outer ring off. In the hot oil cleaning, the oil temperature should not exceed 20 ℃. If the direct use of fire directly heated, should pay attention to avoid burning the oil, the bearing to be suspended in the pan, the bottom will lead to overheating and down hardness.

Second, the general cleaning method to put the oil in the oil soak for 5-10 minutes, one hand pinch the inner ring, the other hand to change the outer ring, the bearing on the dry oil or rust cream will fall. And then three-in-one bus machine bearings into the cleaner oil, with a delicate soft brush rinse, Three in One Busbar Machine the ball and the gap within the oil wash, and then into the gasoline cleaning 1, remove and put in the clean On paper. Radial spherical ball bearings and short cylindrical roller bearings should be clean ball, bead, inner ring and outer ring off cleaning. The following are the same as the "

Installed in the three-in-one bus shaft bearing clean, mainly by leaking oil or oil gun eruption method, a simple clean out of the oil first with oil after the oil; difficult to clean off the oil, first with 100-200 ℃ hot oil leaching or oil gun eruption, and then clean the gasoline. Three in One Busbar Machine Must pay attention not to use sharp things on the scraping bearing: hardened grease or rust, to avoid damage to the bearing tumbling and groove parts of the finish, washed with a clean cloth clean cloth.

Copyright © Jinan Jingpeng CNC Machinery Co.,Ltd. All Rights Reserved.Tel: +86-531-88605317