Noiseless 3-in-1 CNC Brass Busbar Bending Punching Cutting Machine JPMX-303ESK

Noiseless 3-in-1 CNC Brass Busbar Bending Punching Cutting Machine JPMX-303ESK

This type JPMX-303ESK busbar processing machine is mainly used for processing copper or aluminum busbars in different specifications. It is easy to operate to make sure high production efficiency. So it is an ideal processing equipment for electrical appliance manufacturing of high and low voltage.
Product description

JINGPENG Banner 002.jpg

Noiseless 3-in-1 CNC Brass Busbar Bending Punching Cutting Machine JPMX-303ESK

1.Main picture of CNC busbar processing machine JPMX-303ESK:

多-JPMX-303ESK (8).jpg

2.Application of CNC busbar processing machine JPMX-303ESK:

Our busbar machine can bend cut and punch copper and aluminum busbar with three stations working at the same time.

This will largely improve your productivity. It is widely used in switchgear,control panel,switchboard,power transformers production.


3.Three working units of CNC busbar processing machine JPMX-303ESK:

It has three working units: punching unit,cutting unit,bending unit. The three units can work at the same time. The working stroke of each processing unit is adjustable to save time and improve the work efficiency.

A.Punching unit:

1) United six-dies turn-plate structure, make sure the upper die and the lower die are absolutely in the center.

2) 6 punching dies can punch 6 kinds of holes, no need to replace the dies frequently.

3) Three location modes: locating pin, locating ruler and LED light.

4) No pressing mark on the workpiece surface.

5) Can punch non-standard holes with special dies, for example, square hole, oval hole etc.

6) 2 limit switches. (foot switch & press button).


                                        6 punching dies turret punching working station.                                     The punching dies


B.Cutting unit:

1) Use sharp shearing, flat incision interface, no droops, no burrs, no waste.

2) Two pressure type to make sure no apex angle.

3) 2 limit switches. (foot switch & press button).


             Shearing/cutting work station                                          shearing blade (T10)


C. Bending Unit:

With three electric motors and pumps,three working units(punching,cutting,bending units) can work at the same time without interference. Bending unit can complete horizontal bending,vertical bending,U bending,embossing,twisting by

replacing the processing  dies.

1) Horizontal bending.(2 sets horizontal bending dies)

2) Vertical bending. (2 sets vertical bending dies)

3) U bending (1 set)


                       Horizontal bending                                                2 sets of bending dies(3 pieces) 


              Vertical bending                                                           2 sets of bending dies (4 pieces)


                                                   U bending                                                                             U-bending die 


4.General safety regulation before operation:

(1)Make sure a safety work surrounding around the machine.

(2)Don’t dress a scarf or an overcoat when launching the machine, so as not to endanger personal safety.

(3)Make sure the required power supply.

(4)Keep the machine idling running for 5 minutes after start up when the operating temperature below 5 degree Celsius.

(5)Must read the operating manual carefully, be familiar with the structure, performance of the equipment and the operation mode of each work station.



5.Main components of CNC busbar processing machine OF JPMX-303ESK:

In order to ensure the quality of every machine,we adapt top brand components in the world.

A.AC contactor, thermal relay, circuit breaker (Schneider):


B.Siemens PLC:


C.Directional valve & Relief valve  ( Yuken ):


6.Packing and shipping of CNC busbar processing machine:



7.Certification of CE & ISO:





If you have any concern about our products,you are welcome to come to visit our factory to inspect the machine.Waiting for your kindly inquiry!

Contacting person:Mandy(Sales manager)

Skype/Whatsapp/Mob:+86 15866682515


Hot Tags: noiseless 3-in-1 cnc brass busbar bending punching cutting machine jpmx-303esk, China, suppliers, manufacturers, factory, price
Related Products

Copyright © Jinan Jingpeng CNC Machinery Co.,Ltd. All Rights Reserved.Tel: +86-531-88605317