Home > News > Content
The Bus Punching Machine Is Suitable For Electric Power Station Operation
Jun 09, 2017

Bus punching machine SH-70 hydraulic punching machine Features: 1, for angle steel, H-type I-beam, flat steel and copper, aluminum and other metal materials punching. 2, punching speed, punching smooth and no burr, positioning plate design, positioning accuracy is not offset. 3, body light, easy to carry. 4, with quick connector, easy to disassemble. SH-70 hydraulic punching machine Technical parameters: Output: 31 tons Rated pressure: 700BAR Throat depth: 70mm Maximum punching plate thickness: 13mm Maximum diameter: 20.5mm Piston stroke: 25mm Weight: 13kg Standard model: 10.5,13.5, 17.5,20.5mm (a total of 4 pay) Packing: iron toolbox or plastic toolbox using positioning device, in different specifications of the bus on the punching double row of four holes, CNC Busbar Punching Cutting Machine and single row of two holes, hole wall smooth and smooth for the bus ( Mm): copper and aluminum row ≤ 125 × 12.5 Rated output (KN): 900 working stroke (mm): 20 weight (Kg): 30

Bus punching machine is a kind of punching machine, suitable for all kinds of steel, iron, copper, aluminum, forming steel, channel, I-beam and other drilling operations, small size, light weight, CNC Busbar Punching Cutting Machine easy to operate, effort and fast punching. It is composed of manual pump or electric pump and working head. The oil hose is connected with quick connector, which is reliable and fast. It has no directional restriction and easy assembly and disassembly. The machine is specially used for angle iron, flat iron, copper , CNC Busbar Punching Cutting Machine Aluminum and other metal plate perforation.

Use of bus punching machine

A Connect the pump and the working head with quick connector.

B choose the appropriate upper and lower mold, the first installed on the mold after the mold, install the mold when the first screw out of a certain position and then into the lower mold, be sure to put in place, then the screw can be screwed to work The

C put the workpiece, close the oil pump back to the oil screw, CNC Busbar Punching Cutting Machine the plate handle, until the work is completed after the release of oil back to the oil screws, such as red thin metal sheet must be inserted into the material back to the back of the tripod and the workpiece, otherwise The workpiece will be stuck in the mold.

D bus punching machine should range

Applicable to electric power, construction and other industries in the field site operation

Copyright © Jinan Jingpeng CNC Machinery Co.,Ltd. All Rights Reserved.Tel: +86-531-88605317