Home > News > Content
NC Bus Machine Production Efficiency
Jun 09, 2017

CNC bus machine is mainly used for high and low voltage switchgear, transformer manufacturing industry, for processing a variety of copper, aluminum bus. Users as long as the corresponding processing unit, you can be the mother of the red, Production efficiency. Xiaobian today with everyone to understand the use of CNC bus before the precautions are what.

1, must be selected after rigorous training, and proficient in the use, CNC Busbar Machine maintenance and other technical personnel on the machine work.

2, the operator should not wear hypertrophy clothing, wearing decorative items, according to the need to use helmets, goggles, safety boots, gloves and other protective equipment. Cuffs, waist circumference need to tighten, to avoid being dragged by CNC bus machine and involved in the risk Happening.

3, before the start of the operation must be carried out inspection work. Check the punching up and down the template to stop the bolt is tight; CNC Busbar Machine cut the upper and lower template parts of the bolts are loose; bending mold installed firmly.

4, take full account of the NC bus and busbar row on the basis of the set of operating range, the operation of unrelated personnel not to enter the range.In order to avoid problems, it is recommended to use safety fence, care bracket and other protective devices.

5, the equipment starts, the winter air running 15 minutes, the summer air machine running 5 minutes, and then homework.

The same fault can be dealt with by the conventional busbar machine mechanical fault handling, CNC Busbar Machine but the mechanical failure rate is obviously reduced because the mechanical control of the NC bus machine is more electrically controlled and the mechanical structure is simplified.

Most of the faults in this area are caused by the decline of the movement quality.As the backlash gap increases, the positioning accuracy can not meet the requirements, the mechanical crawling phenomenon, the bearing noise becomes larger Especially after the mechanical hard collision is easy to produce.) This part of the maintenance often with the exercise of the preload, loosening ring and compensation links are closely related to the adjustment.

This part of the fault and the handle of the automatic tensioning device, automatic gear device and the spindle movement accuracy decreased, etc. Because the CNC bus machine to take electrical automatic speed control has been canceled after the mechanical transmission device, CNC Busbar Machine sometimes although the gearbox but also Very simple, simplified structure to greatly reduce the failure.

The CNC busbar is equipped with a number of limit movement limit switches, after a period of time, the movement characteristics of the moving parts have changed and the mechanical reliability of the press-fit switch and the quality of the travel switch itself are affected. This requires a good inspection, replacement or adjustment.

Copyright © Jinan Jingpeng CNC Machinery Co.,Ltd. All Rights Reserved.Tel: +86-531-88605317