Non-CNC Single Motor Busbar Processing Machine JPMX-303CM

Non-CNC Single Motor Busbar Processing Machine JPMX-303CM

This type JPMX-303CM busbar processing machine is mainly used for processing copper or aluminum busbars in different specifications. It is easy to operate to make sure high production efficiency. So it is an ideal processing equipment for electrical appliance manufacturing of high and low voltage.
Product description

Non-CNC Single Motor Busbar Processing Machine JPMX-303CM

1.Main picture of Non-CNC busbar processing machine JPMX-303CM:

多-JPMX-303CM  (2).jpg

2.Three working units of Non-CNC busbar processing machine JPMX-303CM:

A.Punching unit:

1) United six-dies turn-plate structure, make sure the upper die and the lower die are absolutely in the center.

2) 6 punching dies can punch 6 kinds of holes, no need to replace the dies frequently.

3) Three location modes: locating pin, locating ruler and LED light.

4) No pressing mark on the workpiece surface.

5) Can punch non-standard holes with special dies, for example, square hole, oval hole etc.

6) 2 limit switches. (foot switch & press button). 

1.png

                                                           Punching unit                                                                        Punching dies


B.Cutting unit:

1) Use sharp shearing, flat incision interface, no droops, no burrs, no waste.

2) Two pressure type to make sure no apex angle.

3) 2 limit switches. (foot switch & press button).

2.png

                                                Cutting unit                                                                      Cutting blade


C. Bending Unit:

Because of only one motor,three working units(punching,cutting,bending units) can't work at the same time.Bending unit can complete horizontal bending,vertical bending,U bending by replacing the processing  dies.

1) Horizontal bending.(2 sets horizontal bending dies).The price included in the machine price.

2) Vertical bending. (2 sets vertical bending dies).The price included in the machine price.

3) U bending (1 set).The price included in the machine price.

3.png

                                      Horizontal bending                                                          Horizontal bending dies

4.png

                                          Vertical bending                                                                   Vertical bending dies

5.png

                                                     U-bending                                                                               U-bending die

3.Main advantages of Non-CNC busbar processing machine JPMX-303CM:

1) Turret rotate punch, no need change dies, high efficiency, save time.

2) Cutting without any waste, save busbar. cutting adge very flat.

3) The machine has 4 foot-wheels, easy to move.

4) There are two operating modes: manual button and foot switch, which is simply operated.

4.Processed copper busbar samples of Non-CNC busbar processing machine JPMX-303CM:

图片1.png

5.Configuration list of Non-CNC busbar processing machine JPMX-303CM:

8 sets of punching die                                                      1 set of shearing blade

2 sets of horizontal bending dies                                       2 sets of vertical bending dies

1 set of U bending die                                                        3 sets of foot switches

1 set of oil filler                                                                   1 set of inner hexagon spanner

1 set of hydraulic system sealing ring                                1 set of random tools    
2 pieces of Limit Switch                                                     1 piece punching location needle

595719612363675508.jpg

887470822454392196.jpg

6.Main components of Non-CNC busbar processing machine JPMX-303CM:

1)AC contactor, thermal relay, circuit breaker (Schneider):

9.png

2)Directional valve & Relief valve  ( Yuken ):

10.png

7.Packing of Non-CNC busbar processing machine JPMX-303CM:

12.png

8.Certifications:CE & ISO9001:

14.png

9.Workshop:

There are more than 50 workers in our factory,they are responsible for every machine,in order to confirm the quality of every machine,they will bebug repeatly before packing and shipping.

QQ图片20180203091311.jpg

16.png

9.Contacting:

If you have any concern about our products,you are welcome to come to visit our factory to inspect the machine.Waiting for your kindly inquiry!


Contacting person:Mandy(Sales manager)

Skype/Whatsapp/Mob:+86 15866682515

Email:mandy@sdjpsk.com


111.JPG






Hot Tags: non-cnc single motor busbar processing machine jpmx-303cm, China, suppliers, manufacturers, factory, price
Related Products
Feedback

Copyright © Jinan Jingpeng CNC Machinery Co.,Ltd. All Rights Reserved.Tel: +86-531-88605317