Hydraulic Bus Bar Processing Machine

Hydraulic Bus Bar Processing Machine

JPMX-80P Hydraulic busbar processing machine is mainly used for cutting punching copper or aluminum busbar.
Product description

JPMX-80 Hydraulic Bus Bar Processor Machine

JINGPENG Banner 001.jpg

 

 

Product Description

 

Appearance of Hydraulic Bus Bar Processor Machine

 

 Hydraulic Busbar Machine.jpg


Application of Hydraulic Bus Bar Processor Machine

 

This type JPMX-80P Hydraulic busbar processing machine is mainly used for cutting punching copper or aluminum busbar.

It is easy to operate and high production efficiently.

It is widely used in switchboard and power transformers fabrication.

 

Advantage of Hydraulic Bus Bar Processor Machine

It has two units: shearing/ cutting unit and bending unit.

This machine adopts 80 tons of hydraulic system.

It can punch four holes at one time at the same time.

Depending on the width of the copper, the size of the mold and the center distance between the hole and the hole can be freely used.

By replacing the mold, the copper can be cut, bent, and press cable connectors.

 

Details parameters of Hydraulic Bus Bar Processor Machine

Function

Item

JPMX-80P

Punching

Max. Punching Force (KN)

800

Punching Diameter Range (MM)

Ø4.3-Ø21

Max. Thickness (MM)

12

Max. Width (MM)

125

Shearing/Cutting

Max. Shearing Thickness (MM)

        12

Max. Shearing Width (MM)

125

Hydraulic Cylinder

 

Stroke of Hydraulic Cylinder

 

50mm

Out Dimension

MM

1300*760*1500

Power

KW

5.5kw

Weight

KG

900kg

Working Precision

Error for distance between holes

±0.05mm

Error for cutting length

±0.5mm


 The working video of Hydraulic Bus Bar Processor Machine

https://youtu.be/ymTcLtRlpIc

 

Punching unit:

1) 4 punching dies can punch 4 kinds of holes, no need to replace the dies frequently.

2) Three location modes: locating pin, locating ruler and light.

3) No pressing mark on the workpiece surface.

4) Can punch non-standard holes with special dies, for example, square hole, oval hole etc.

5) 2 limit switches. (foot switch & press button)

By added punching position,the machine can locate x axis and y axis mechanical double direction location. that makes workers need not to cross lines and make punching marks , then improving the operating efficiency and accuracy of punching.

Cutting section 02.png

Cutting section 01.png

 

Shearing/ cutting unit:

Use sharp shearing, flat incision interface, no droops, no burrs, no waste.

Two pressure type to make sure no apex angle.

2 limit switches. (foot switch & press button)

 

Cutting unit is with double upright pillars and double blades cutting structure.The above blade and below blade are installed vertically parallelly ,make sure the cut smooth,no waste,no deformation for longtime used.

cutting tools 001.jpg

Packaging & Shipping


Firstly, the Hydraulic Busbar Punching Machine is to be packed with plastic sheet for cleaning and damp proofing.
Secondly, fasten the Hydraulic Busbar Punching Machine into the wood case for safety and against clashing.
Thirdly, transport the wood case into the container.

Packing

Company Information

 

1. Our certificate:

 

We are professional manufacturer for busbar processing machine in China for more than ten years. Our busbar processing machine are approved by ISO & CE certificate, the machine quality is highly respected among customers in North America, Europe and most Asia countries. 

 

.jpg

2. Our busbar machine on the electrical equipment exhibition:

 

exhibition2 

 

3.Our Factory :

.jpg

FAQ

 

1.  What is your payment terms?

 

40% TT as deposit, balance be paid when goods are ready for loading before shipment.

2.  What is your delivery time?

 

Usually within 7 days after the deposit.

 

3.  What is your power supply?

 

We will adjust according to your countries power supply. No problem.

 

4.  What is your Min order quantity?

 

One set. Our customers can be end users, retailers and wholesalers.

 

5. Are all the Labels and instuctions of the machine in English?

 

Yes. the labels on the machine and the manuel books are all made in english version.

 

6. Besides this machine, do you have any other options for me?

 

We have dozens of options for you:

 

CNC busbar machine; Non- CNC busbar machine, combined busbar machine,

busbar cutting tools, busbar bending tools, busbar punching tools.

hydraulic pumps, hand pumps etc. 

Please contact with us to know more informations! 

 

7. What is your requirement for exclusive / sole agent?

 

We are looking for sole agent in world market.

We need to test the credit and the monthly quantity of the importers.

If the importer credit is good and reliable. And the monthly order quantity meet local market demand. We will come to further association.

 

Contact Us:

Email: david@sdjpsk.com

 

Business Card 001.png

Hot Tags: hydraulic bus bar processing machine, China, suppliers, manufacturers, factory, price
Related Products
Feedback

Copyright © Jinan Jingpeng CNC Machinery Co.,Ltd. All Rights Reserved.Tel: +86-531-88605317