CNC Single Working Desks Copper Busbar Bending Punching Cutting Machine JPMX-503SK

CNC Single Working Desks Copper Busbar Bending Punching Cutting Machine JPMX-503SK

This type JPMX-503SK busbar processing machine is mainly used for processing copper or aluminum busbars in different specifications. It is easy to operate to make sure high production efficiency. So it is an ideal processing equipment for electrical appliance manufacturing of high and low voltage.
Product description

CNC Single Working Desks Copper Busbar Bending Punching Cutting Machine JPMX-503SK

1.Three working units:

It has three working units: punching unit,cutting unit,bending unit. The three units can work at the same time.The working stroke of each processing unit is adjustable to save time and improve the work efficiency.

A.Punching unit:

1) United six-dies turn-plate structure, make sure the upper die and the lower die are absolutely in the center.

2) 6 punching dies can punch 6 kinds of holes, no need to replace the dies frequently.

3) Three location modes: locating pin, locating ruler and LED light.

4) No pressing mark on the workpiece surface.

5) Can punch non-standard holes with special dies, for example, square hole, oval hole etc.

6) 2 limit switches. (foot switch & press button).

1.png

                                                    6 punching dies turret punching working station.                                     The punching dies

B.Cutting unit:

1) Use sharp shearing, flat incision interface, no droops, no burrs, no waste.

2) Two pressure type to make sure no apex angle.

3) 2 limit switches. (foot switch & press button).

2.png

             Shearing/cutting work station                                          shearing blade (T10)

 

C. Bending Unit:

With three electric motors and pumps,three working units(punching,cutting,bending units) can work at the same time without interference. Bending unit can complete horizontal bending,vertical bending,U bending,embossing,twisting by

replacing the processing  dies.

1) Horizontal bending.(2 sets horizontal bending dies)

2) Vertical bending. (2 sets vertical bending dies)

3) U bending (1 set)

4) Embossing

5) Twisting

6) PLC control. Input the copper thickness and angle directly. 

3.png 

                       Horizontal bending                                                2 sets of bending dies(3 pieces) 

4.png

              Vertical bending                                                           2 sets of bending dies (4 pieces)

5.png

                         U-bending                                                                      1 set of U bending die

6.png

        Embossing die                                                                  Embossing sample

7.png

                                                                 Twisting                                                                    Twisting dies

2.Main advantages:

1) Turret rotate punch, no need change dies, high efficiency, save time.

2) Cutting without any waste, save busbar. cutting adge very flat.

3) The machine has 4 foot-wheels, easy to move.

4) There are two operating modes: manual button and foot switch, which is simply operated.

5) Only need to input the thickness and angle,you can get the busbar shape.

3.Configuration list:

8 sets of punching dies                                      1 set of shearing blade
2 sets of horizontal bending dies                        2 sets of vertical bending dies

1 set of U bending dies             3 sets of foot switches

1 set of oil filler                                                    1 set of inner hexagon spanner

1 set of hydraulic system sealing ring       1 set of random tools    
2 pieces of Limit Switch                                      1 piece punching location needle.

4.Main components:

A.AC contactor, thermal relay, circuit breaker (Schneider):

9.png

B.Simen PLC:

11.png

C.Directional valve & Relief valve  ( Yuken ):

10.png

5.Packing and shipping:

12.png

6.Certification of CE & ISO:

14.png

7.Workshop:

16.png

8.Contacting:

If you have any concern about our products,you are welcome to come to visit our factory to inspect the machine.Waiting for your kindly inquiry!


Contacting person:Mandy(Sales manager)

Skype/Whatsapp/Mob:+86 15866682515

Email:mandy@sdjpsk.com


111.JPG











Hot Tags: cnc single working desks copper busbar bending punching cutting machine jpmx-503sk, China, suppliers, manufacturers, factory, price
Related Products
Feedback

Copyright © Jinan Jingpeng CNC Machinery Co.,Ltd. All Rights Reserved.Tel: +86-531-88605317