News

Home > News > Content
CNC Bus Machine Operation Is Very Convenient
Oct 19, 2017

 

CNC bus machine is mainly used for processing a variety of copper, aluminum mother, which includes platen, support plate, grating controller, cylinder, indenter, column, shear mold, punching die, bending mold. Here to bring you together to understand the characteristics of CNC bus machine.

1, CNC bus machine equipped with red, cut, fold three processing units, the processing of each unit can be easily adjusted, so you can reduce the processing time and improve production efficiency. By changing the CNC bus processing machine mold can also achieve a variety of processing functions.

2, CNC busbar bending unit using CNC mode, at the same time with memory function, can be entered in advance processing data, CNC Busbar Machine the system according to the input information on the data transfer processing. Another CNC bus machine can be processed on-site data at any time into the system, and call out the re-use.

3, NC bus processing machine with a password protection function, you can modify the unqualified data, if the customer is not using the standard workpiece, CNC Busbar Machine but also according to non-standard requirements of the workpiece to set their own data processing, operation is very convenient.

The same fault can be dealt with by the conventional busbar machine mechanical fault handling, but the mechanical failure rate is obviously reduced because the mechanical control of the NC bus machine is more electrically controlled and the mechanical structure is simplified.

Most of the faults in this area are caused by the decline of the movement quality.As the backlash gap increases, the positioning accuracy can not meet the requirements, the mechanical crawling phenomenon, the bearing noise becomes larger Especially after the mechanical hard collision is easy to produce.) This part of the maintenance often with the exercise of the preload, CNC Busbar Machine loose ring and compensation links are closely related to the adjustment.

This part of the fault and the handle of the automatic tensioning device, automatic gear device and the spindle movement accuracy decreased, etc. Because the CNC bus machine to take electrical automatic speed control has been canceled after the mechanical transmission device, CNC Busbar Machine sometimes although the gearbox but also Very simple, simplified structure to greatly reduce the failure.

The CNC busbar is equipped with a number of limit movement limit switches, after a period of time, the movement characteristics of the moving parts have changed and the mechanical reliability of the press-fit switch and the quality of the travel switch itself affect the movement of the whole machine This requires a good check, replacement, or adjustment.

CNC bus machine is mainly used for high and low voltage switchgear, transformer manufacturing industry, for processing a variety of copper, aluminum bus. Users as long as the corresponding processing unit, CNC Busbar Machine you can be the mother of the red, High production efficiency. Today, Xiaobian to bring you together to understand the use of CNC bus before the precautions are what.

1, must be selected after rigorous training, and skilled use, maintenance and other technical personnel on the machine work.

2, the operator should not wear hypertrophy clothing, wearing decorative items, according to the need to use helmets, goggles, safety boots, gloves and other protective equipment. Cuffs, CNC Busbar Machine waist circumference need to tighten, to avoid being dragged by CNC bus machine and involved in the risk Happening.

3, before the start of the operation must be carried out inspection work. Check the punching up and down the template of the retaining bolt is tight; cut the upper and lower template parts of the bolts are loose; bending mold installed firmly.

4, take full account of the NC bus and busbar row on the basis of the set of operating range, the operation of unrelated personnel not to enter the range.In order to avoid problems, CNC Busbar Machine it is recommended to use safety fence, pallet support and other protective devices.

5, the equipment starts, the winter air running 15 minutes, CNC Busbar Machine the summer air machine running 5 minutes, and then homework.





Copyright © Jinan Jingpeng CNC Machinery Co.,Ltd. All Rights Reserved.Tel: +86-531-88605317