News

Home > News > Content
Bus Punching Machine Processing Efficiency
Jun 22, 2017


Bus punching machine processing capacity: iron plate 6mm, copper 10mm

Throat depth: 95mm

Weight: 18kg

Busbar punching machine instructions

● Dedicated to angle iron, flat iron, copper and other metal plate perforation, CNC Busbar Punching Cutting Machine especially for electricity, construction and other industries in the field site operation.

● with pump: CP-700, ZCB-700, ZCB-700B, the factory does not pump, to be another purchase.

● At the bottom of the design of a flat seat, smooth can not shake.

● Separate hydraulic punching machine for L, H flat steel, steel plate aluminum punching.

● For other specifications, please order separately.

The busbar punching machine comprises a double cylinder, a screw shaft, a motor seat one, a servo motor, a screw shaft two, a motor seat two, a servo motor two, a mold seat, CNC Busbar Punching Cutting Machine a punching die and a punching die, One end of the lead screw is connected with the servo motor and the other end is connected with the double cylinder through a screw nut, the servo motor is fixed on the motor base two, and one end of the lead screw is connected with The servo motor is connected with two, and the other end is connected with the mold base through the screw nut, and the punching die and the punching die are arranged on the mold seat. CNC Busbar Punching Cutting Machine The invention solves the contradiction between the punching efficiency and the tonnage of the stamping, and uses the different tonnage cylinder to divide the punching and punching, and the punching die is much smaller than the punching die, and the machining efficiency is improved.

Use of bus punching machine

A Connect the pump and the working head with quick connector.

B choose the appropriate upper and lower mold, the first installed on the mold after the mold, put on the mold when the first screw out of a certain position and then into the lower mold, CNC Busbar Punching Cutting Machine be sure to put in place, then the screw can be screwed to work The

C put the workpiece, close the oil pump back to the oil screw, the board handle, until the work is completed after the release of oil back to the oil screws, such as red thin metal sheet must be pushed into the back of the material back to the tripod and the middle of the workpiece, CNC Busbar Punching Cutting Machine otherwise The workpiece will be stuck in the mold.

D bus punching machine should range

Applicable to electric power, construction and other industries in the field site operation





Jinan Jingpeng CNC Machinery Co.,Ltd